Quick Install Guide
ioi HD
CF-5212/CF-5222
Analytic Fixed IP Cameras
A. Connect the Camera
B. Discover the Camera
The unit's GUI is supported by IE 9 and higher (32-bit)
with the ActiveX plug-in on PCs running 64-bit Windows XP,
7, 8, 8.1, or 10.
B.1. Configuring the encoder on your workstation for
the first time
1. Install the CD in the product package or download FLIR’s
Discovery Network Assistant (DNA) utility from the
Support
> FLIR Firmware & Software Downloads
page at http://
www.flir.com/security.
2. Click the DNA icon
and run DNA v. 2.1.x.x or above to log
into the unit.
3. Attach the unit to the same LAN segment as the computer
that is managing the unit. DNA automatically discovers the
unit on the network and displays the device’s current IP
address in the Discover List.
4. Select the unit from the Discover List.
5. From the context menu, or from the
Properties > Device
Properties
screen, select the unit, select PAL or NTSC,
click
Change Video Format.
6. C
lick
Update
.
B.2.a Managing the encoder with Horizon, Meridian or
on a DHCP-enabled network
If the encoder is managed by Horizon configured as a
DHCP server, or is on a network with a DHCP server, the
encoder automatically receives an IP address
.
1. Open DNA. The unit is automatically discovered on the
network. See section B.1 for instructions how to install
DNA.
2. Verify that the unit is displayed in the Discover List. The unit
status should be displayed as
Online
and
Authenticated.
B.2.b Managing the encoder with Latitude or on a
network with static IP configuration
If the encoder is managed by Latitude or is on a network
without a DHCP server, you must manually enter its IP
address in DNA.
1. Open DNA. The unit is automatically discovered. See
section B.1.
2. If you use non-default credentials:
a. Use DNA to select the unit(s).
b. Right-click or click the
Login
button.
c. Enter the encoder's User Name ("admin") and
Password ("admin").
d. Click
Login
.
3. In the
DNA Assign IP
screen, uncheck
Use DHCP,
and
enter the unit’s IP, Mask and Gateway IP addresses. If the
encoder is not authenticated, you must first authenticate it.
4. Click
Update
.
B.3. Log into the Unit
1. Click the unit in DNA’s Discover List. The
Login
window
opens.
2. Enter the default User Name ("admin") and Password
("admin"), which are case-sensitive. Then click
OK
.
3. Click
Login
in DNA. The unit’s web interface opens.
4. Click the message to install the ActiveX plug-in.
5. Follow the on-screen instructions to install the plug-in.
