Installation & User Manual - Oncam C-12 Series
©
Oncam Global Group AG, 2021. All rights reserved.
17
Figure 12 Cover Twist
Using the alignment feature as a guide, push on
the cover twist to lock in place.
Recessed Mounting
This camera is designed to work with sheet material such as plasterboard. There is no minimum
sheet thickness, only it requires
flat material, however the spring retaining strength will be
weaker the thinner the material is.
The springs will retai
n the camera material up to a maximum 25mm [1"] thick.
Figure 13 Drilling Hole
After selecting a suitable position, drill a
⌀
100mm
(
⌀
4") hole.
Figure 14 Feeding Ethernet cable to the hole
Feed a suitable ethernet cable to the hole.