Point data is typically collected with some static stacking. The default value here is 64. The system will
take 64 scans at that location and average them together to output a single scan. This is done to minimize
high-frequency, random noise.
Position the antenna at the first data point station and press Run/Setup. You will see the blank, 1-pane
Run screen. Press Run/Stop to collect a point of data. The blue wait bar will scroll at the bottom-left of
the screen while the system is busy recording and stacking your data. When it is finished, the collected
scan number will appear above the Command Bar. Re-position your antenna at the next collection point
and push Run/Stop to collect another point. When finished with the collection, press Run/Setup to return
to the setup screen and save your data.