GSM Gecapp crono Wi-Fi, Manual

Page: 36 / 64

36
For example:
ON/OFF
To turn off the GecApp crono Wi-Fi at your home, set the icon and press the key
SEND
(Fig.8).
The programmable thermostat at home will receive the new settings within a period of 15
seconds. Upon shutdown on the Smartphone/Tablet you will receive a
push notification
(
Parameters updated correctly
).
To turn on the GecApp crono Wi-Fi at your home, set the icon and press the key
SEND
(Fig.9).
Upon shutdown on the Smartphone/Tablet you will receive a
push notification
(
Parameters
updated correctly
).
On the display of your Smartphone/Tablet you will see the STATUS of home GecApp crono
Wi-Fi .
Fig.8 Fig.9
SEND SETTINGS VIA APP
STATUS GecApp crono Wi-Fi
Using the buttons on the CONTROL PANEL (Fig. 7) set the desired operating mode and press
the key
SEND
.
After a few seconds you will receive a
push notification
to confirm the STATUS .
The STATUS of the Programmable Thermostat GecApp crono Wi-Fi is updated with the new
settings.
N.B. If the new STATUS settings are sent using the same Wi-Fi network to which is
connected the Programmable thermostat , the communication will be almost instantaneous.
If new STATUS settings are sent using a network other than the one that is connected to the
Programmable Thermostat,
the communication will take place within 30 seconds.