GSM Gecapp crono Wi-Fi, Manual

Page: 58 / 64

58
A u t o
ADVANCED PARAMETERS
Press the key “ " from the Home page to enter the PARAMETERS menu (Fig. 20).
By pressing "
Other settings
" you will open the
ADVANCED PARAMETERS
(Fig.21) where you can
set:
-
AUX AUXILIARY RELAY (Auto/ON/OFF)
-
Maximum temp. exceeded.
-
Minimum temp. exceeded.
-
Temp. Anti-freeze.
-
DISPLAY the status of the
Remote contact.
-
AUXILIARY RELAY
If you set the Auxiliary relay (Aux) to mode, the
status of the programmable thermostat will be as
follows:
the Auxiliary relay (Aux) will follow the
• If the
GecApp Crono Wi-Fi
is
ON
the
Auxiliary relay
will be
ON
(Closed).
• If the GecApp Crono Wi-Fi is OFF the Auxiliary relay will be OFF (Open).
- If you set the Auxiliary relay (Aux) to pre ON
mode (Close).
- If you set the
Auxiliary relay (Aux) to pre OFF
mode (Open).
the Auxiliary relay (Aux) will be
sem- the Auxiliary relay (Aux) -
After setting the Auxiliary relay press the key “ OK” (Fig.22) to send to the GecApp crono Wi-
Fi the new settings. The programmable thermostat at home will receive the new settings within a
period of 15 seconds. Upon successful update of settings on your Smartphone/Tablet you will
receive a push notification like "Parameters updated successfully"
Fig.20 Fig.21 Fig.22
ON
OFF