GSM Gecapp crono Wi-Fi, Manual

Page: 43 / 64

43
-
REMOTE CONTACT
The Remote contact is normally open dry input contact, voltage-free.
When closing the Remote contact , all Smartphones/Tablets that are associated with the
Programmable thermostat will be notified via a
push notification
.
The Remote contact is displayed in “ OFF ” when the contact is OPEN and vice versa,
displayed in “ ON” when the contact is CLOSED.
-
TEMP. MAXIMUM/MINIMUM TEMP. EXCEEDED
Maximum temperature and minimum temperature are two temperature thresholds that once
exceeded, a
push notification
is sent.
The
push notification
is sent to all users who are associated with the GecApp Crono Wi-Fi .
Maximum temperature and minimum temperature by default are disabled.
1 - Enable to activate the threshold Temp. Maximum and Threshold of Min. Temp.
(Fig.23).
2 -Click on the temperature value.
3 -Slide the digits (° C) setting the Min. and Max . Temp. threshold (Fig. 24).
4 - Confirm with the key “ “.
5 - Press the key “ " to send to the GecApp crono Wi-Fi the new settings.
The programmable thermostat at home will receive the new settings within a period of 15
seconds. Upon the successful update of settings on your Smartphone/Tablet you will receive a
push notification
like "
Parameters updated successfully
"
Fig.23 Fig.24