GSM Gecapp crono Wi-Fi, Manual

Page: 26 / 64

26
C
LOCK WITH PASSWORD
To activate the display, simply touch it.
Press and hold for about 2 seconds the buttons “
” “ and "(Fig. 75) until the desired
PASSWORD
setup interface appears on display (Fig. 76).
Numbers
“ ”
represent the digits that make up the PASSWORD . To
change the blinking digit use the buttons “
+C
” or “ -C ” .
To move to the next or previous digit press the keys “
-H
” or “
+H
” .
Confirm the PASSWORD by pressing the button " (Fig.77).
+C
LU
-H +H
+C
-H +H
+C
-H +H
-C
-C -C
Fig.75 Fig.76 Fig.77
Upon the appearance of the symbol " " (Fig 78), the programmable thermostat is blocked
and it will not be possible to modify any parameter using the display before the unlock. It will be
instead possible to modify parameters via Smartphone/Tablet .
You can exit the
PASSWORD setting at any time, simply by
pressing the button, or waiting 12 seconds without touching the display of the
programmable thermostat.
To unlock the programmable thermostat press and hold the " " symbol (Fig. 78) and enter
the PASS-WORD .
Confirm the PASSWORD by pressing and holding the key “ ” (Fig.79).
If the PASSWORD is correct, on the programmable thermostat, the symbol " will
disappear; otherwise, on diplsay will appear the message " Err ", indicating that the entered
PASSWORD is incorrect (Fig 80). In this case, repeat the operation.
+C
LU
-H +H
LU LU
-
Fig.78 Fig.79 Fig.80
N.B. If you forgot your PASSWORD, please contact customer support.