Operation with a Satellite Receiver
ķ
41
❒
ShowView Timer recording from a
satellite receiver without control cable
Ń
!
With this type of programming, broadcasts can
only be programmed from one programme position
of the satellite receiver.
Switch the TV set on and select the programme
position for the video recorder (AV programme
position).
Insert a cassette with sufficient playing time into
the cassette compartment.
Ń
!
Check the time and date on the recorder.
Example 2
Use the buttons on the remote control for this
function.
Switch on the satellite receiver and select the
desired programme position.
Ń
!
The satellite receiver must be switched on up to the
recording time selected and for the duration of the
TIMER recording.
Start programming using the
›
SV/V+
button.
– The data is indicated on the TV screen and on the
display on the recorder.
Use the numbered buttons
1
…
0
to enter the
ShowView of the desired TV programme.
If incorrect entries are made, the
›
CLEAR
button
can be used to delete the last digit of the ShowView
number.
Confirm the ShowView number using the
G
button.
– The recorder converts the ShowView number into
the actual recording data.
Confirm programme position » A 2 « using the
G
button or
select using the
B
PROGRAM
button and confirm
using the
G
button.
Confirm programming with the
G
button.
– The data of the programme is stored at the first
memory position (TIMER). The remaining playing
time is indicated briefly.
Ń
!
The recorder is in record standby mode. All drive
mechanism functions of the recorder are now
“blocked”.
Ń
!
To programme further TV programmes first press
the
›
TIMER ON/OFF
button then repeat the procedure
from step
of the example.
You will find additional functions for TIMER record-
ing on this page.
Ǻ
1
6
5
4
Ǻ
3
2
1
Ǻ
2
1
❒
Additional functions for the TIMER
recording
The entries for this function must be selected
according to step
of example 1 and according to
step
of example 2.
– If the programme is to be recorded without
VPS/PDC control, press the
›
VPS/PDC (red)
button.
The star (
*
) in the table indicates recording with
VPS/PDC control.
– If the recording is to be made in long-play mode,
press the
›
SP/LP
button.
– The data can be altered using the
B
PROGRAM
,
B
DAY
,
B
START
,
B
STOP
buttons.
❒
Setting a programme position for the
ShowView system
Setting for example 1
Ń
!
This setting can only be carried out if the recorder
and the satellite receiver are connected using a
control cable.
Ń
!
If the recorder display flashes »
A2
« and the
message » Selecting a programme « appears on
the table, the recorder has not found the TV station
programme position.
The required station identification must be selected
in the » Prog « column with the
B
PROGRAM
button
(for example BBC) and confirmed with the
G
button.
❒
Note on using this unit in conjunction
with GRUNDIG television sets that have a
built-in satellite receiver
It is not possible to control the record function
using the VPS/PDC signal when this unit is used in
conjunction with GRUNDIG television sets that have
a built-in satellite receiver.
4
3
Summary of Contents for GV 740 HiFi
Page 1: ...VIDEORECORDER GV 740 HiFi...
