Settings
ķ
12
Tuning TV stations
Television stations broadcast programmes on diffe-
rent frequencies/channels.
The recorder has a built-in receiver. It can therefore
receive and record television programmes indepen-
dently of the TV set.
First, you must tune your recorder to the channels
used by the different TV stations.
There are 99 programme positions available. They
can be tuned as required to TV stations from the
aerial, cable connection or from the satellite.
❒
The options for tuning TV stations:
1. By transfer of data from the TV set.
The TV set must be provided with Megalogic
functions.
2. With the automatic tuning system (ATS euro
plus). The recorder searches, sorts and stores all
channel/special channels which can be received
at its location.
This procedure depends on the language and
country you select, as well as the quality of
reception of the TV stations.
If you are not satisfied with the order in which
the TV stations are allocated, the order can be
changed later.
3. By entering data directly.
4. By searching manually, for example if there are
new TV stations, or if the recorder cannot find a
TV station with the automatic tuning system.
❒
Note on TIMER programming
with the teletext pages from TV stations.
For this type of TIMER programming, you will find
the data for the broadcast (for example programme,
date, switch-on and switch-off time) not from tele-
vision magazines, but from programme indexes
which certain TV stations offer on teletext pages.
The numbers for the teletext pages where the pro-
gramme indexes are given can vary from station to
station.
You can now decide which page from the pro-
gramme index you will want to use most often to
programme recordings.
Enter the number of the teletext page required in
the » TV station table «.
How this is done is described in the example on the
following pages.
With TIMER programming this teletext page is then
called up automatically.
Transfer of data from the TV set
(download with Megalogic function)
If the recorder is connected to a TV set with Mega-
logic function, the recorder automatically accepts
the TV programmes that are stored in the TV set.
To enable the recorder to do this, you must carry
out the following steps in the order indicated.
Ń
!
The recorder and TV set must be connected with
the supplied Megalogic-EURO-AV cable and the TV
set must be switched on.
Remove the plug for the recorder from the mains.
Re-insert the plug for the recorder into the mains.
– The recorder automatically accepts the TV pro-
grammes from the TV set.
The recorder will now have the same programme
allocation as the TV set.
If a programme position is changed on the TV set
the recorder will automatically accept the change.
❒
Notes when moving house
If you move house you must first clear the “old” TV
stations. Do this as follows:
Remove the plug for the recorder from the mains.
Keep the
‚
button on the recorder pressed down
and reinsert mains plug. Keep the
‚
button pressed
down until the display »
20:00
« appears on the
recorder.
– The data is erased. The “new” stations can now
be accepted from the TV set with the Megalogic
function.
2
1
Ǻ
2
1
➡
Summary of Contents for GV 740 HiFi
Page 1: ...VIDEORECORDER GV 740 HiFi...
