Grundig GU-CI Series User Manual Download Page 57

Page: 57 / 82

English

This setting is not controlled by Enable.

FTP Picture Upload

：

The camera sends the picture to the associated FTP server when matching

is successful.

Note: At the same time, the effective time is controlled by the schedule, and the FTP server

needs to be associated first.

Cloud Picture

：

The camera sends the picture to the associated cloud storage server when

matching is successful.

Note: At the same time, the effective time is controlled by the schedule, and the cloud storage

server needs to be associated first.

8.7.3.3 FA - Face Attendance

By Face Attendance (FA) function, camera can retrieve different groups saved in SD card

(excluding stranger group) matching the situation of human faces at a specified time. Attendance

record can be generated based on the captured records, and can be sent to the associated

mailbox.

Figure 8.30

Enable:

Switch to generate the attendance record automatically by FA

Send Email

：

Send the time of FA check-in. The firmware retrieves once at a certain interval.

When the retrieval time is longer than the set time, the attendance record is automatically

generated and sent to email.

Note: No email will be sent if there is no attendance record.

ON DUTY

：

The reference time of on duty for generating the attendance record.

OFF DUTY

：

The reference time of off duty for generating the attendance.

Summary of Contents for GU-CI Series



















































































Search results

Summary of Contents for GU-CI Series

Reviews:

Related manuals for GU-CI Series

Brands by name

Popular brands

Grundig GU-CI Series, User Manual

Search results

Summary of Contents for GU-CI Series

Reviews:

Related manuals for GU-CI Series

Brands by name

Popular brands