Grundig GU-CI Series, User Manual

Page: 45 / 82

English
45

Customize
：
Select this mode and a region box will appear on the small window. Click the
red small box next to the digital ID of the region box to drag or stretch the region.
（
Noted
：
Trigger PD&VD
，
"S" will appear on the channel, identify the pedestrian line in green
box, and identify the vehicle line in blue box. A pop-up window will appear in the lower left
corner of the page, as shown in picture 4-12. In addition, PID / LCD and PD & VD / FD are
mutually exclusive and cannot be enable at the same time).
8.7.1.3 PID – Perimeter Intrusion Detection
When target enters or leaves the alarming zone, the alarm will be triggered through Perimeter
Intrusion Detection (PID) function.
Figure 8.19

Enable
：
Enable or disable PID detection

Sensitive
：
Sensitive level, range is 1-4, the default setting is 3. If the detected object
sensitivity is higher, the moving object can be detected easily. Meanwhile, the false detection
rate is higher. Suggest to use default level.

Dynamic Marking: choose to show or don’t show the track.

Detection Type
：
The detection types include pedestrian and vehicle. When the settings are
enabled, the only detect the alarms triggered by human or vehicles, but need to consume
more CPU of IPC. If it is not turned on, all objects passing through the line will be detected.

Rule Number
：
Max set 4 rule number. Draw a rule area on the area map, and click to the next
few rules, then you can draw rules on the area map. The rule switch and rule type of each rule
are independent, and they need to be opened, closed or set separately.