Grundig GU-CI Series User Manual Download Page 28

Page: 28 / 82

English

Export

：

Click to export the results to the computer.

Attendance results:

“←” means leaving early, “→” means late, “←”“→” means both leave early

and late, “√”means normal attendance. “○” means absence. The green line indicates the start

and end time of attendance.

Search Result Secondary Display Area

：

Click on a person, and detailed time information will be

displayed at the bottom right. The due time that matches this person will be marked with a red

bar. Click the red bar to jump to the corresponding quick playback.

Click Detail icon to view detailed information. Click the playback icon to enter the corresponding

quick playback.

Figure 7.11

Click the arrow in the lower right corner to flip the results.

Summary of Contents for GU-CI Series



















































































Search results

Summary of Contents for GU-CI Series

Reviews:

Related manuals for GU-CI Series

Brands by name

Popular brands

Grundig GU-CI Series, User Manual

Search results

Summary of Contents for GU-CI Series

Reviews:

Related manuals for GU-CI Series

Brands by name

Popular brands