Grundig GU-CI Series, User Manual

Page: 44 / 82

English
44

Dynamic Marking: choose to show or don’t show the track

Snap Mode
：
There are three recognition modes, default mode, real-time mode and interval
mode

Default
：
The default optimal mode. When human or vehicle enter the monitoring area, the
camera will always capture. After a human or vehicle leaved the monitoring area, the best and
clearest of the captured images in this period will be saved in NVR. Default (IPC can’t save
picture).

Realtime Mode
：
One picture will be sent to the device when person or vehicle enters the
monitoring area in IPC, and the second picture will be sent to NVR when a person or vehicle
leaves the monitoring area.

Interval Mode
：
Push pictures to the docking device. You can set the maximum number of
times to send and the interval for each picture to be sent.

Snap Number
：
Number of push pictures for each locked target can be set as 1, 2, 3 and infinite
times, that is, push pictures to the recorder once every second, and push once, 2, 3 and
infinite times. (Note: this function is available in interval mode)

Snap Frequency
：
n s/pic
（
n can set to 1—255
）
, Select the best snapshot every N seconds
and push it to the docking recorder.

Min Pixel
：
The lowest pixel setting of human and vehicle. When the recognized object is
smaller than the pixel, no alarm is generated accordingly. It can be set to 64-1080. Note: the
figure recognition function recognizes the whole picture as a 1080p picture.

Max Pixel
：
The highest pixel setting for human and vehicles. When the recognized object is
larger than the pixel, no alarm will be generated accordingly. It can be set to 320-1080. Note:
The image recognition function can recognize the entire image as a 1080p image.

Detection Type
：
There are two type of Pedestrian & Vehicle
，
select the type to detect. Two
detection types, pedestrian and vehicle, can be opened at the same time.

Detection Mode
：
There are two detection modes---- Motion Mode & Static Mode.

Motion Mode
：
snap the human or vehicle in motion.

Static Mode
：
snap the human or vehicle in motion or static.

Detection Range
：
Setting detection area, there are two modes, Full Screen & Customize.

Full Screen
：
The detection area is the camera all cover area.