Grundfos Selcoperm SES Series, Installation And Operating Instructions Manual

Page: 57 / 82

English (GB)
57
8.5.24
Service Power Supply
This menu shows information on the internal power supply.
Fig. 60
Service Power Supply
To revert to the previous menu, push [ ].
For details on general menu symbols see section 8.5.6
System
overview
.
8.5.25
Service Cell Lines
This menu shows the cell lines and process settings and is used
for commissioning of the system. See section
7. Commissioning .
Fig. 61
Service Cell Lines
To revert to the previous menu push [ ].
Details on general menu symbols can be found in section
8.5.6
System overview
.
For details on component colours see section 8.5.3 Colours .
8.5.26
Service Tank
The menu shows settings for the degassing fans of the degassing
and storage tank.
Fig. 62
Service Tank
To revert to the previous menu, push [ ].
For details on general menu symbols see section 8.5.6
System
overview
.
For details on component colours see section 8.5.3 Colours .
Menu action Required user level
Access menu 3
Commissioning staff
Change settings 3
Commissioning staff
ID
02
01
Display text /
symbol
Description
24 V channels:
Channel 1
Emergency
stop
Green:
Channel active without fault. Current
consumption below set limit.
Red:
Channel manually deactivated or current
consumption limit exceeded.
Channel 2
PLC
Channel 3
internal
Channel 4
external
If channels are deactivated due to exceeded
current consumption limits, after approximately
20 seconds all channels can be activated using
this button.
5 V channel: Channel for flow sensors (0.02, x.10, 1.11).
See fig.
5 .
Channel 1
internal
Green:
Fuse ok.
Red:
Fuse blown.
Menu action Required user level
Access menu 3
Commissioning staff
Change settings 3
Commissioning staff
ID 0
2
5
0
Menu action Required user level
Access menu 3
Commissioning staff
Change settings 3
Commissioning staff
ID
02
51