English (GB)
4
1.3 Target group
1.3.1 Qualification and training
The persons responsible for installation, startup, operation and
maintenance must be appropriately qualified for these tasks.
Areas of responsibility, levels of authority and the supervision of
the persons must be precisely defined by the operating company.
If necessary, the persons must be trained.
Operating company
The company or person who owns the system is referred to as
"operating company" in this document. The operating company
has to coordinate the installation of the system in agreement with
Grundfos. After installation, commissioning must be done by
certified service persons.
Certified service persons
The persons responsible for commissioning, parametrisation and
advanced maintenance of the system are referred to as "certified
service persons" in this document. These persons must be
trained and certified for these tasks by Grundfos.
Users
The persons responsible for operation and basic maintenance of
the system are referred to as "users" in this document. The users
must be trained for their tasks by certified service persons.
1.3.2 Obligations of the operating company
• Observe the local safety regulations.
• Make sure that the regulations for the prevention of accidents
are observed at the installation location.
• Keep the documentation package available at the installation
location at all times.
• Prepare the installation location according to the installation
requirements specified in this document. See section
.
• Obtain official approval for storing chemicals, if necessary.
• Make sure that the users are trained before operating the
system.
• Provide the stipulated safety equipment and personal
protective equipment.
• Make sure that the labels supplied by the manufacturer with
the system are displayed visibly at the installation location.
• Provide the passwords for the operating software only to the
persons who have received an appropriate technical training.
• Arrange regular maintenance.
1.3.3 Obligations of the certified service persons
• Read this manual thoroughly before putting the system into
operation.
• Observe the recognised health and safety regulations as well
as the accident prevention regulations.
• Wear protective equipment in accordance with national health
and safety regulations when working on the system and
handling chemicals.
• Meet the installation requirements specified in this document.
See section
• Perform installation and commissioning in accordance with the
knowledge and documents received during the training at
Grundfos.
• Train the users in performing the user relevant maintenance
tasks mentioned in this document.
• Parametrise the system according to on-site requirements
during commissioning.
1.3.4 Obligations of the user
• Read this manual thoroughly before putting the Selcoperm
system into operation.
• Read all documents delivered in the documentation package
thoroughly before installation, operation, commissioning,
maintenance, service or storage of the Selcoperm system.
• Obtain instructions from Grundfos specialists on all service
work relating to the system.
• Observe the recognised regulations for health, safety and
accident prevention.
• Wear protective equipment in accordance with the national
health and safety regulations when working on the system and
handling chemicals.
• Keep secret the passwords for the operating software.
1.4 Symbols used in this document
The text accompanying the three hazard symbols DANGER,
WARNING and CAUTION is structured in the following way:
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious personal injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious personal injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate personal injury.
SIGNAL WORD
Description of hazard
Consequence of ignoring the warning.
- Action to avoid the hazard.
A blue or grey circle with a white graphical symbol
indicates that an action must be taken.
A red or grey circle with a diagonal bar, possibly with
a black graphical symbol, indicates that an action
must not be taken or must be stopped.
If these instructions are not observed, it may result in
malfunction or damage to the equipment.
Tips and advice that make the work easier.
