English (GB)
52
8.5.14
Overview brine pumps
This menu gives an overview of the brine pumps of the brine
dosing station. The display below is shown in systems with two
brine pumps. For systems with one brine pump, the options for
the second pump are not displayed.
Fig. 50
Overview brine pumps
Changes done in this menu are taken over by the system
immediately.
If a pump is currently in use and the user sets the value "
blocked
"
for it, the system changes over to the standby pump. If no
standby pump is present, an error message is shown and the
system stops.
To reset the values to factory settings, push [
].
To revert to the previous menu, push [
].
For details on general menu symbols see section
.
For details on component colours see section
8.5.15
Overview tank
This menu gives an overview of the degassing and storage tank
and the degassing fan.
Fig. 51
Overview tank
To revert to the previous menu, push [
].
For details on general menu symbols see section
For details on component colours see section
.
Menu action
Required user level
Access menu
No login required
Change settings
2
Parametrising staff
Change setting "
Max. capacity
" 3
Commissioning staff
Reset to factory settings
3
Commissioning staff
ID
00
31
Display text
Description
Current
capacity
Current brine dosing capacity.
Setpoint
Brine flow setpoint of the brine dosing station.
It can be changed using the keys to the left and
to the right of the value or by changing the
value directly in the input field.
Max. capacity
Maximum dosing capacity of the brine dosing
pumps. It can be changed directly in the input
field.
Operation
The value "
enabled
" means that the pump is
enabled for operation. The value "
blocked
"
means that the pump is not enabled for
operation (e.g. for maintenance).
To toggle between these values, push the
respective symbol [
]. A yellow symbol
represents the value "
blocked
".
Operating
hours counter
Operating hours of each dosing pump.
Menu action
Required user level
Access menu
No login required
ID
0
0
40
Symbol
Description
See
section
Temperature sensor. Next to the symbol
the name (see PID) and the measured
value are displayed.
Level switch. Next to the symbol the name
(see PID) is displayed. The small dot on
the top right of the symbol indicates the
status of the switch by its colour:
• White: No liquid is detected
• Blue: Liquid is detected
Exhaust air flow sensor. Next to the
symbol the name (see PID) and the
measured value are displayed. Below the
measured value the minimum and
maximum values are displayed. To change
the values see section
.
Level switch. Next to the symbol the name
(see PID) is displayed.
Degassing tank level sensor. Next to the
symbol the name (see PID) is displayed.
The measured value is displayed in the
middle of the tank symbol.
Push this symbol to open menu "
Settings
tank level
".
Push this symbol to open menu "
Overview
fans
".
