Troubleshooting
58 | 80
BA_TD
3-
BM
000e
n_
06
4_sof
tli
Q
-M
C
.docx
9.1.2
Error messages (red symbols)
Display shows
Explanation
Remedy
Power failure > 5 minutes
Only displayed if detection
is activated.
If there is a power failure,
any regeneration in
progress at the time is
stopped and then
continued afterwards.
Check the electrical power
connection.
Reset the clock of the water softener
if there is a power failure> 3 days
(only in case of "fixed" regeneration
time, refer to chapter 7.5).
Initiate a manual regeneration (refer
to chapter 7.2).
Salt supply used up!
Refill
immediately!
(Order no. 127 100)
Salt supply used up.
Refill salt tablets into the brine tank
(refer to chapter 7.8)
Acknowledge the malfunction with
ENTER.
If the error message reoccurs, notify
Grünbeck's technical service/
authorised service company.
Cavity under the salt.
Loosen incrustations with a suitable
tool.
Water pressure too low.
Increase flow pressure to at least 2.0
bar.
Chlorine cell worn.
Brine filling orifice,
injector, injector sieve or
brine valve clogged.
Notify Grünbeck's technical service/
authorised service company.
Check soft water hardness!
Observe operation manual
The desired soft water
hardness cannot be
achieved with the raw
water hardness set.
Check settings of raw water
hardness and desired soft water
hardness (refer to chapter 7.7).
Reduce soft water hardness.
If the error message reoccurs, notify
Grünbeck's technical service/
authorised service company.
Error during start-up!
Observe operation manual
Start-up was interrupted
as no water flow could be
detected, or the
connection hoses were
mixed up.
Chlorine currents too low
Reference runs not
possible
Check whether the raw water shut-off
valve is open (refer to chapter 6.1).
Check whether water is flowing in the
current start-up step or whether the
connection hoses are connected
correctly.
Briefly unplug the mains plug and
restart the start-up-program.
If the error message reoccurs, notify
Grünbeck's technical service/
authorised service company.
Summary of Contents for softliQ:MC
