Grunbeck softliQ:MC, Operating Manual

Page: 45 / 80

Operation
45 | 80
BA_TD
3-
BM
000e
n_
06
4_sof
tli
Q
-M
C
.docx
7 Operation
7.1 Retrieving information
Status level>Menu level>Information
7.1.1 Information 1
Here, you see a graphic display of the current system function.
Figure Explanation
Both exchangers are in operation. The system capacity
declines from the top downwards. One bar corresponds to 20
%. The light bars show the available system capacity.
Below the symbols, the current mode is indicated:
Eco/Power/Comfort
One exchanger is in operation, the other is being regenerated.
The bars of the grey symbol correspond to the following
regeneration steps from the bottom upwards:

Fill brine tank (lowermost bar)

Salting

Slow rinse

Backwash

Washing out (highest bar)
Below the symbols, the regeneration step is indicated.
Explanation of symbols: Blue symbol Grey symbol
7.1.2 Information 2
Display Explanation
System flow rate Indicates the current flow rate of the system. The value is
displayed in m³/h.
Days the salt supply is
expected to last Indicates for how long the salt supply is estimated to last. The
value is displayed in days.
Raw water hardness Indicates the set raw water hardness. The value is displayed in
the selected hardness unit.
Actual soft water
hardness Indicates the set soft water hardness. The value is displayed in
the selected hardness unit.