Grunbeck softliQ:MC, Operating Manual

Page: 33 / 80

Installation
33 | 80
BA_TD
3-
BM
000e
n_
06
4_sof
tli
Q
-M
C
.docx
5 Installation
The installation of a water softener represents a major intervention into the drinking water
system and may only be performed by a specialist installer.
Item Designation Item Designation
1 Safety device protectliQ 2 Drinking water filter pureliQ
3 Garden water pipe 4 Water withdrawal point
5 EXADOS dosing computer 6 Drain connection DN 50 acc. to DIN EN 1717
5.1 Requirements in relation to the installation site
Observe local installation directives, general guidelines and technical specifications. The
installation site must be frost-proof and ensure the system's protection from chemicals, dyes,
solvents and vapours.
Always install a drinking water filter and, if required, a pressure reducer (e.g. fine filter
pureliQ:KD) upstream of the system. A shock-proof socket is required within a distance of
approx. 1.2 m of the system. For the discharge of the regeneration water, a drain connection
(DN 50) must be available.
NOTE: The system will not function without continuous power supply.
● No soft water will be available if the system is operated without power.
► Do not interconnect the socket with a light switch, heating emergency switch or
the like.
2 5 4
6
1
3