Grunbeck softliQ:MC, Operating Manual

Page: 14 / 80

Product description
14 | 80
BA_TD
3-
BM
000e
n_
06
4_sof
tli
Q
-M
C
.docx
3.4.2 Pre-alarm salt supply
Once per regeneration, a light sensor checks the filling level of the regeneration salt. If the
filling level of the regeneration salt is low, the control unit provides feedback in the form of a
warning message. This is shown by a yellow symbol in the control unit. If the level falls below
the minimum filling level, the control unit calculates how many days the salt supply is
expected to last and indicates this value in days.
The days the salt supply is expected to last are calculated based on the water consumption
of the past days. In case of fluctuating water consumption, the indicated range of the salt
supply also fluctuates.
3.4.3 Illuminated LED ring
The illuminated LED ring illuminates the brine tank and is a visual signal to indicate operating
states. The illuminated LED ring may be programmed to the following functions:
● Is illuminated during water treatment
● Is illuminated during operation of the control unit
● Intermittent flashing in case malfunctions do occur
● Intermittent flashing in case of pre-alarm salt supply
If desired, the illuminated LED ring can be set to continuous illumination or be deactivated
completely (refer to chapter 4.4).
3.5 Product registration
If you register your product, the warranty for this product will be extended by one year.
You have the following options to register your product:
● Registration on Grünbeck's website (www.gruenbeck.com).
● Registration using the myGrünbeck app (refer to chapter 4.6).