Grunbeck softliQ:MC, Operating Manual

Page: 22 / 80

Control unit
22 | 80
BA_TD
3-
BM
000e
n_
06
4_sof
tli
Q
-M
C
.docx
4.5 Code-protected levels
The settings described here may only be made by Grünbeck's technical service/authorised
service company.
Status level>Menu level>Technical service
1. Touch ENTER briefly.
2. Enter the code with ▼ and ▲.
3. Confirm with ENTER.
4.5.1 Installer level (code 005)
The settings described here may only be made by Grünbeck's technical service/authorised
service company.
In the extended installer Level, additional parameters and values can be modified:
Menu items Settings/remarks
Information
exchanger 1 (indication only) Current flow [m³/h]
Capacity figure [m³ x °dH]
Remaining capacity [m³]
Regeneration step [min.] or [l]
Last regeneration [date/time] over [%]
Information
exchanger 2 (indication only) As for exchanger 1
Blending
information Current flow [m³/h]
Setpoint of soft water hardness [°dH]
Actual soft water hardness value [°dH]
Actual raw water hardness value [°dH]
Flow rates (indication only) Parallel operation
Peak value x.xx [m³/h] for xxxxx [min.]
Exchanger 1
Peak value x.xx [m³/h] for xxxxx [min.]
Exchanger 2
Peak value x.xx [m³/h] for xxxxx [min.]