Model G0854 (Mfd. Since 08/18)
-29-
16. Place straightedge over infeed (right) end of
main table and extension table. Make sure
straightedge touches top of extension table
roller above leg (see
Figure 32).
— If straightedge makes solid contact across
entire infeed end of main table and top of
extension table roller, no adjustment is
necessary. Proceed to
Step 18.
— If straightedge does not make solid con-
tact across entire infeed end of main table
and top of extension table roller, extension
table is not aligned with main table and
must be adjusted. Proceed to
Step 17.
Figure 33. Checking extension table to see if it
is aligned with main table.
17. Loosen jam nut at bottom of extension table
leg, rotate adjustable foot nut until extension
table is aligned with main table, then tighten
jam nut against bottom of leg to secure
setting (see
Figure 34).
18. Repeat Steps 16–17 for outfeed (left) end of
table.
Cleanup
The infeed fence is coated with a heavy-duty rust
preventative that prevents corrosion during ship-
ment and storage. This rust preventative works
extremely well, but it will take a little time to clean.
Be patient and do a thorough job cleaning.
There are many ways to remove this rust preven-
tative, but the following steps work well in a wide
variety of situations. Always follow the manufac-
turer’s instructions with any cleaning product you
use and make sure you work in a well-ventilated
area to minimize exposure to toxic fumes.
Before cleaning, gather the following:
•
Disposable rags
•
Cleaner/degreaser (WD•40 works well)
•
Safety glasses & disposable gloves
•
Plastic paint scraper (optional)
Basic steps for removing rust preventative:
1. Put on safety glasses.
2. Coat rust preventative with a liberal amount
of cleaner/degreaser, then let it soak for 5–10
minutes.
3. Wipe off surfaces. If your cleaner/degreaser
is effective, rust preventative will wipe off
easily. If you have a plastic paint scraper,
scrape off as much as you can first, then wipe
off the rest with rag.
4. Repeat Steps 2–3 as necessary until all rust
preventative and cleaner/degreaser are com-
pletely removed.
Figure 34. Location of extension table alignment
components.
Adjustable
Foot Nut
Jam Nut
Extension
Table Leg
Adjustable
Foot
Roller
Infeed
End
Summary of Contents for G0854
Page 96: ......
