-24-
Model G0854 (Mfd. Since 08/18)
Lifting & Placing
HEAVY LIFT!
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
5. Lift machine with forklift enough to clear pal-
let, then have an assistant slide pallet out of
the way.
6. Position machine as necessary, then gently
lower it onto floor.
7. Stabilize machine by loosening jam nuts
and rotating leveling bolts (see
Figure 16)
until machine is relatively level and stable at
all four conerners, then tighten jam nuts to
secure. The leveling bolts are located at rear
left and right corners of machine.
To lift and place machine:
1. Position crate with machine as close to
installation location as possible.
2. Remove top of crate, then remove
plastic wrap and small items packed around
machine.
3. Unbolt machine from pallet.
Figure 15. Example of inserting forks for lifting
edgebander.
It is always best to place machine on as flat a
surface as possible to prevent tipping and rocking
during operation. If the machine tips or rocks, and
there is no other suitable location to place it, you
will need to stabilize it, using the leveling bolts.
Figure 16. Location of (1 of 2) leveling bolts with
jam nuts.
Leveling Bolt
Jam Nut
4. Position forklift forks as wide as possible
while still fitting under center opening of edge-
bander cabinet (see
Figure 15). Protect
machine body from forks with cardboard.
Summary of Contents for G0854
Page 96: ......