GRAUPNER X-8N, Manual

Page: 39 / 48

Eng
lish
39
INNOVATION & TECHNOLOGY
38
INTERFACE
In this menu item it is defined, via which port of the transmitter the telemetry data will be
transmitted to the outside.
DATA PORT:
If you select this setting, the telemetry data will be output via the DATA socket on the
rear side of the transmitter. There, the external Bluetooth module S 8351 will be plugged in. In the
BT SPEED line below, FAST or NORMAL will be set, depending on the transmission speed of the
counterpart station.
USB PORT: If you select this setting, the telemetry data will be output via the mini USB socket
on the rear side of the transmitter. Here, a connection to the PC can be established by using the
supplied connection cable 7168.
Firmware update transmitter
Firmware updates of the transmitter can be performed in two ways. However, observe the
following "Important instructions" in both cases.
Via memory card
Download an up-to-date software package from our homepage on the Internet and unpack it on
your PC or laptop. Insert the supplied mini SD Card in the card slot of your PC or laptop and copy
the required firmware file from the unpacked software package into the directory "Firmware" on the
memory card. Then, remove the memory card from the PC or laptop and insert it in the card slot of
the transmitter. Switch your transmitter on with the HF switched OFF.
Go to the submenu "FIRMWARE UPDATE" in the menu »Hidden mode« and select the
corresponding file from the SD card. Start the update with ENTER and follow the instructions.
Via rear USB port …
… by using a PC or laptop with Windows XP, Vista, 7 or 8.
Download an up-to-date software package from our homepage on the Internet and unpack it on
your PC or laptop. Connect your switched off transmitter with your PC or laptop, by using the USB
cable (USB-A to mini-B-USB, 5 pole), which is supplied as a standard accessory, by plugging one
end of the USB cable directly into the 5 pole mini-USB connector at the rear side of the transmitter
and the other end into a free USB port of your computer. For more information, please refer to the
respective software package. Here, update instructions are enclosed in a PDF file.