Eng
lish
37
36
In this menu, you can make the telemetry settings, monitor the
connection between transmitter and receiver, set the voice
output and recognize which sensors are connected.
SETTING & DATA VIEW:
Here, you enter the telemetry menu
and you can make settings. Depending on the connected
device or receiver, different screens appear (please observe
the instructions of the corresponding devices or receivers)
TELEMETRY MENU
In this menu, you can make the telemetry settings, monitor
the connection between transmitter and receiver, set the voice
output and recognize which sensors are connected.
SETTING & DATA VIEW:
Here, you enter the telemetry menu
and you can make settings. Depending on the connected
sensors or receiver, different screens appear (please observe
the instructions of the corresponding sensors or receivers)
Selection of the device in the menu via the
FUNC
button.
RF STATUS VIEW:
This screen visualises the quality of the connection between transmitter and
receiver (only display)
VOICE TRIGGER:
Here, the settings for the voice output are made
SENSOR:
List of the sensors connected to the receiver (only display)
Telemetry menu display with bound HoTT receiver (Gr-12/16/24/32)
Telemetry menu display with bound HoTT V2 receiver (Gr-4/GR-8)
RF STATUS VIEW
VOICE TRIGGER
RF STATUS VIEW:
This screen visualises the quality of the
connection between transmitter and receiver (only display)
Select the device and
press ENTER, here,
the selection for the
voice output is made.
REPEAT:
if the
REPEAT
function is activated (via
SW/FUN
menu,
VOICE RPT
function),
the repetition time of the voice output can be set here.
FIX.:
current voice output from play list
TRANSMITTER, RECEIVER, ESC, SERVO...:
List of the devices in SUMD-V2 system
Summary of Contents for X-8N
Page 44: ...English 44 Notes...
