GRAUPNER X-8N, Manual

Page: 31 / 48

Eng
lish
31
INNOVATION & TECHNOLOGY
30
SW FUN menu
In this menu, you can assign a function to trim buttons,
switches and rotary controls. By default, some buttons
and switches have already been assigned functions,
which can be assigned again as all the others, as follows:
After selecting a switch with the UP/DOWN buttons, press
Enter , and the menu with the possible functions for this
switch appears.
Here you can select a function with the UP/DOWN and
INC/DEC buttons and confirm it with ENTER .
Then, the display goes back to the previous screen, where
you can see the new function behind the switch.
Meaning of the functions for TR1, 2, 3, 4, 5 and rotary control
ST TRIM Steering trimming
TH TRIM Throttle trimming
3CH TRIM Channel 3 trimming
4CH TRIM Channel 4 trimming
ST Sub Trim Steering sub trimming
TH Sub Trim Throttle sub trimming
3CH SUBT Channel 3 sub trimming
4CH SUBT Channel 4 sub trimming
ST Dual Steering Dual Rate
ATL Brake travel setting
ST EXPO Steering exponential function
TH CP2 Throttle curve point 2
TH CP3 Throttle curve point 3
TH CP4 Throttle curve point 4
TH CP5 Throttle curve point 5
TH CP6 Throttle curve point 6
RESP FW Throttle response point (TH RESP menu)
RESP BK Brake response point (TH RESP menu)
SPD ST RT Speed steering servo right forward path (S/SPEED menu)
SPD ST LT Speed steering servo left forward path (S/SPEED menu)