GRAUPNER X-8N, Manual

Page: 21 / 48

Eng
lish
21
INNOVATION & TECHNOLOGY
20
RF SET menu
In this menu, the binding of the receiver, the selection of
the receiver, the display of the telemetry receiver, HF on/
off, range test and the selection signal per channel can be
performed. By pressing the
UP/DOWN
buttons, you can
move in the menu, with the ENTER button you can select
the menu item (selection has a dark background), with
INC/DEC
or
UP/DOWN
you can change the value.
This menu appears if no receiver is bound to the selected
model memory location. After the binding process, the whole
menu appears as on the following display. Before you bind a
receiver, you can select in the line TELEMETRY (YES / NO),
if the telemetry data should be displayed or not (eg switched
off for competitions).
(Binding - see Chapter: Binding and range test)
Meaning of the individual menu items
• MODULE = HoTT for receiver (GR-4/12/16/24/32)
HoTT V2
for receiver with SUMD-V1 (GR-8)
• RECEIVER
= Display of the currently bound receiver type
• TEL.RCV = Display of which receiver provides the telemetry data when several receivers
are bound
• RF ON/OFF = Display, whether HF is switched on or off
• RANGE TEST = Range test (see Chapter: Binding and range test)
• CH FUNCTION ==> (only available in HoTT V2 operation with suited receiver)
In this menu, the properties for adjusting to the servo,
used by the respective channel, are set. (Observe the
information from the servo manufacturer)
Attention:
The setting SUMD-V2 can only be used for Graupner
servos, sensors and controllers supporting this function!
Attention:
Follow the instructions on the screen, in order
to save the settings in the receiver!
Proceed in this order!
1. Switch off receiver
2. Switch off transmitter
3. Switch on transmitter
4. Switch on receiver
Afterwards, in the telemetry menu, check whether the
settings are displayed in the receiver.
Meaning of the settings:
USR1m50 : ULTRA SIGNAL 1.5 msec
FSR3m00 : FAST SIGNAL 3.0msec
SUMD-V2 : FAST SIGNAL BUS 3.0msec
NSR6m00 : NORMAL SIGNAL 6.0msec
NSR12m0 : NORMAL SIGNAL 12.0msec
NSR24m0 : NORMAL SIGNAL 24.0msec