Eng
lish
39
38
You can enter HIDDEN MODE from the main screen, by
pressing the
UP
and
DOWN
buttons simultaneously. Here,
you can load the voice files or a firmware update from the
SC card. You can also do the stick calibration.
VOICE:
Press
ENTER,
if you have inserted an SD card with
the corresponding voice files, a list appears with the files to
be selected. Press ENTER, the update starts.
FIRMWARE UPDATE:
Press
ENTER,
if you have inserted an
SD card with the corresponding update files, a list appears
with the files to be selected. Press
ENTER
, the update starts. (see Chapter Firmware update)
STICK CALI.:
If the full deflections
of the encoders cannot
be reached anymore, this menu is used to perform the stick
calibration. Turn the steering wheel or press the throttle lever
into the indicated direction up to the stop and press
ENTER.
Then into neutral position, press
ENTER
. Now, into the other
direction up to the stop, press
ENTER
.
Hidden mode
Telemetry display
In order to display the telemetry data, press the
INC
or
DEC
button from the main screen. Then,
all available telemetry screens are displayed (only with bound receiver), depending on the
connected sensors or devices. The selection of the device or sensor is then set by pressing the
INC
or
DEC
buttons. Then, confirm with
ENTER
.
INC
DEC
INC
DEC
The number of the connected devices
is displayed in the upper right corner.
Depending on the selection of the device,
different screens appear.
(Please also read the instructions of the
device or sensor)
Summary of Contents for X-8N
Page 44: ...English 44 Notes...