Eng
lish
29
28
A.B.S. menu
DUTY
CYC
MOVE
In this menu, the A.B.S. function can be set.
A.B.S. enables a better braking response, since the brake is
actuated in pulses.
ACT:
INH = function OFF, ACT= function ON
SW:
Display of switches which can be assigned to this
function in the
"SW FUN"
menu (see list in Chapter "SW
FUN menu")
ACT:
ACT = A.B.S. ON, INH = A.B.S. OFF
DUTY:
Ratio between pulse and pulse pause (see sketch below)
T/P:
Here, the point on the brake lever path is set, from which the A.B.S. will become active
MOV:
Setting the pulse height (see sketch below)
CYC:
Setting the pulse length (see sketch below)
DELAY:
Here, you set the delay time, until the response of the A.B.S. (0 - 1 s)
IDLE UP menu
In this menu, the motor start function "Idle Up" can be set.
IDLE UP
enables a better start of the cold combustion mo-
tor, since the throttle is held on a specific value, here. You
can set this value in the
POS
line. After starting the mo-
tor, this function has to be deactivated again, since the
throttle lever has no effect during the
IDLE UP
function.
ACT:
INH = IDLE UP function OFF, ACT = IDLE UP function ON
SW:
Display of switches which can be assigned to this function in the
"SW FUN"
menu
(see list in Chapter "SW FUN menu")
Summary of Contents for X-8N
Page 44: ...English 44 Notes...
