GRAUPNER X-8N, Manual

Page: 14 / 48

Eng
lish
15 14
The adjusting screw
for adjusting the
neutralization spring
for the steering wheel
is located in the
housing below the
wheel.
By turning the screw
left or right, the reset
force is increased or
decreased.
Adjusting the neutralization springs
Converting the steering wheel for left-handers
Adjusting the position of the steering wheel
The adjusting screw for adjusting the neutralization
spring for the throttle lever is located in the housing
at the throttle lever.
By turning the screw left or right, the reset force is
increased or decreased.
The entire steering wheel can be converted to the left side for operation by left-handers.
To do so, you have to change the trim button insert, lying underneath. For left-hander
operation, use the trim button insert, included in the supply.
1. Remove the HoTT logo cover (see following figure)
2. Now, unscrew the steering wheel
3. Unplug the cable of the steering wheel
4. Mount the steering wheel on the left side and replug the cable. Mount the trim button
insert, included in the supply.
5. Tighten the steering wheel and refit the HoTT logo cover.
You can adjust the position of the steering
wheel forward or backward. To do so,
remove the cover with the HoTT logo above
the steering wheel. Then, loosen the two
screws and place the steering wheel in its
new position. Now, you retighten the two
screws.