Eng
lish
29
INNOVATION & TECHNOLOGY
28
PUMPING menu
In this menu, the "PUMPING" function can be set.
PUMPING
enables automatic throttle activations, e.g. dur-
ing refuelling, so the motor does not overgrease or go
out when in idle. You can set the strength of the throt-
tle activation in the
POS
line. The waiting time between
the throttle activations can be set in the
DELAY
line.
ACT:
INH = PUMPING function OFF, ACT= PUMPING function ON
SW:
Display of switches which can be assigned to this function in the
"SW FUN"
menu (see list in
Chapter "SW FUN menu")
START menu
In this menu, automatic start function "
START
" can be set.
The
START
function allows a quick start without spinning of
the drive wheels, since the throttle is held on a specific value,
first. You can set this value in the
RATE
line. This function
is activated by assigning a switch. By activating this switch,
the
START
function is set on standby. If now the throttle lever
exceeds the trigger point (
T/POS
), the function is triggered.
With
TIME
, the delay of the response of this function is set,
when exceeding the trigger point.
ACT:
INH = START function OFF, ACT= START function ON
SW:
Display of switches which can be assigned to this function in the
"SW FUN"
menu (see list in
Chapter "SW FUN menu")
TIME
RATE
T/POS
Summary of Contents for X-8N
Page 44: ...English 44 Notes...
