GRAUPNER X-8N, Manual

Page: 26 / 48

Eng
lish
27 26
UP TIMER:
Up-counting stopwatch
Starting and stopping the timer by assigning a button in the
"SW FUN" menu
- Alarm - Setting the alarm time 0 - 99 minutes
- P/Alarm - Warning before the alarm time has elapsed
0 - 59 sec.
LAP RECORD:
- Maximum lap number: 99
(99m59s99 can be saved per lap)
- BEST LAP: Display of fastest lap
- AVER LAP: Display of average time of all laps
LAP TIMER:
- FINISH Overall Timer: Total travel time
- TG / Timer: Target time
- ALARM: Alarm time
- P / ALARM: Pre-registration of alarm time
- AV / TIME: Average travel time
The timer function is started or stopped by assigning switches in the SW FUN menu. The function
is executed as follows:
• Menu: LAP TIMER, FINISH is shown inversed
• By pressing INC/DEC simultaneously, the timer is set in standby, the FINISH display changes
to READY, the timer is started by accelerating
• Pressing switch for "LAP TIMER" = 1x = intermediate stop of the timer function, pressing 2x =
finishing the timer (e.g. PS1)
• Switch for "LAP STOP" = Stopping the lap time
Logging function:
If an SD card is insert and lap timer (see timer chapter ) activated by the throttle, then the telem-
etry data are logged on the SD card. The recording stops when the timer is set to "end". The data
from the SD card can be read on a PC with appropriate software (eg Data Explorer).
DOWN TIMER:
Down-counting stopwatch
Starting and stopping the timer by assigning a button in the
"SW FUN" menu
- Alarm - Setting the alarm time 0 - 99 minutes
- P/Alarm - Warning before the alarm time has elapsed
0 - 59 sec.
- SET TIMER: Setting the time, from which it is counted
up or down