GRAUPNER HoTT MC-16 Series, Programming Manual

Page: 40 / 332

40 Transmitter description - Telemetry data display
module as well as the fuel consumed in ml.
SENSOR 1
0.0V
0°C
SENSOR 1
If attached, this display depicts currently measured
voltage and temperature from a temperature/volt-
age sensor, order no. 33612 or 33613, connected
to “T(EMP)1” of the General-Engine module (or-
der no. 33610) or the General-Air module (order
no. 33611).
SENSOR 2
0.0V
0°C
SENSOR 2
If attached, this display depicts currently measured
voltage and temperature from a temperature/volt-
age sensor, order no. 33612 or 33613, connected
to “T(EMP)2” of the General-Engine module (order
no. 33610) or the General-Air module (order no.
33611).
Rotary speed sensor
rpm
0
0 0
If attached, this display depicts the measured ro-
tary speed of a speed sensor (order no. 33615 or
33616) attached to a General-Engine module (order
no. 33610) or a General-Air module (order no. 33611).
Note:
The appropriate blade count must first be set in the
module’s telemetry menu before the correct speed
can be displayed.
Vario
0.0
0
m
m
s
If attached, this display will depict the altitude (in m)
relative to location, starting location as well as the
current rate of ascent/descent (in m/s) data origina-
ting from a Vario integrated into a General-Engine
module (order no. 33610) or General-Air module
(order no. 33611).
Speed display
0
km/h
If the corresponding sensor is available, this screen
displays the model’s actual speed over the ground.
Air pressure display
0.0
Bar
If the corresponding sensor is available, this screen
displays the actual air pressure.
“Weakest cell”
Cell0=0.00V
If the corresponding sensor is available, this screen
displays the voltage of the weakest cell in a battery
block, together with the number of that cell.
ELECTRIC AIR MODUL
VARIO
GPS
RECEIVER
AIR ESC
GENERAL
ELECT. AIR
0.0V 0m/3s
BAT1 0m/1s
BAT2
0.0V T2 0°C
T1 0°C
0
1L0.00
2L0.00
3L0.00
4L0.00
5L0.00
6L0.00
ALT 0m
7L0.00
0.0V 0A