GRAUPNER 32032, Programming Manual

Page: 26 / 324

26 General operating notices - Face-side connections
Bottom side transmitter interior
Notes:
Disconnect the transmitter battery at its
connector when performing any type of work
inside the transmitter. Never allow solder points
to come into contact with objects as this can
create short circuit conditions.
All jacks and plugs not described are to be left
unconnected.
Transmitter battery plug
For charging the battery and a list of
suitable automatic chargers, see page 17
Lithium battery CR2032
(not rechargeable)
Independent backup for the transmitter's
date and time settings, see »Info display«
menu on page 266.
Transmitter battery
Observe charging rules, see page 16
Plug-in locations
Six free plug-in locations for additional
switches are standard
, see page 21
These switch plug-in locations can
be used in any sequence.
Plug-in location
One free plug-in location for a proportional
rotary control module,
order no. 33001.11
INT PPM plug-in location
One free plug-in location for connecting
an additional – internal – RF module
Lithium battery CR2032
(not rechargeable)
Independent backup for the transmitter's
date and time settings, see »Info display«
menu on page 266.
Plug-in locations (UVR, 5-pole)
eight free plug-in locations for future
rotary control installations.