GRASS VALLEY JUPITER -, Instruction Manual

Page: 143 / 220

JUPITER L-S and LCD Series Control Panel Instruction Manual143
Section
7
LCD Introduction
Overview
The Jupiter LCD series Control panels are designed to control matrix
routers through a Grass Valley Jupiter CM-4000 (or CM-4400) Control
System that is running the AccuSwitch application. Although the panels
are intended to control Concerto, Trinix, Apex, and Venus routers, any
matrix router that can be controlled by AccuSwitch can also be controlled
by these panels. The LCD series is comprised of the following units: the
LCD16 and the LCD48 panels.
Note The CM-4000 (or CM-4400) must be operating with Jupiter AccuSwitch
version 7.7.0 or newer to support the LCD panels. The LCD panels are not
intended for use with CM-4000/Jupiter XPress applications nor with Jupiter
VM-3000 System Controllers.
The Jupiter LCD panels can be ordered with an AC or a DC power supply.
The AC power supply is mounted to the rear of the panel. No power switch
is present on the control panel. To power down the panel, you must discon-
nect the AC or DC power cord.