GRASS VALLEY JUPITER -, Instruction Manual

Page: 45 / 220

JUPITER L-S and LCD Series Control Panel Instruction Manual45
Button Labels
It is also possible to configure the panel with a custom category set. See Cat-
egory Button Configuration on page 46 for more information.
S25/S50
The S25 and S50 panels have 25 or 50 buttons on the left side of the panel
that can be used for “Button-per-Source” operation. Using the label sheet,
these buttons can be labeled 1 through25 (or 50 respectively). If the button
assignments are more or less permanent, it might be desirable to label them
more specifically. See
Source Button Configuration on page 45 for more infor-
mation.
Figure 16. S25
These panels also include a cluster of eight buttons on the right side that
can be configured and labeled to select router levels. See
CP Level Set on
page 61
for more information.
SXY Panels
The SXY panels include a cluster of buttons on the left side that can be con-
figured and labeled to select router levels. See
CP Level Set on page 61
for
more information.
Figure 17. SXY Control Panel Showing Level Buttons
The SXY panels also have a cluster of 16 buttons on the right side that can
be used for category/number operation. See
Category Button Configuration
on page 46 for more information.
Button Configuration Overview
Source Button Configuration
Source button functions are assigned on a panel by creating a Jupiter CP
Input set of type CPESXTND. The set table in this Input set consists of a list
Level
Clear
Protect/
Lock
1 2 3 4 5
6 7 8 9 10