manualshive.com logo in svg

GRASS VALLEY JUPITER -, Instruction Manual

The Grass Valley Jupiter - a cutting-edge media server offering unmatched flexibility and advanced features. Access the comprehensive product manual and datasheet for free download at manualshive.com. Get detailed instructions and technical specifications to maximize your experience with this state-of-the-art media server.

Share
Download
background image

JUPITER L-S and LCD Series Control Panel Instruction Manual155

Ordering Information

 

Ordering Information

JUP-CP-LCD16 Series Control Panels

JUP-CP-LCD16-AC

Jupiter 16 soft labeled RGB LCD button control panel. Configurable as BPS, XY Status 
panel & Category entry for up to 20 input/output categories. Scroll wheel operations. With 
AC power supply. (JUP-ACPS-1RU).

JUP-CP-LCD16-DC

Jupiter 16 soft labeled RGB LCD button control panel. Configurable as BPS, XY Status 
panel & Category entry for up to 20 input/output categories. Scroll wheel operations. With 
DC power supply. (JUP-DCPS).

JUP-CP-LCD16-AC-GP

Jupiter 16 soft labeled RGB LCD button control panel. Configurable as BPS, XY Status 
panel & Category entry for up to 20 input/output categories. Scroll wheel operations. With 
AC power supply & GPIO option. (JUP-ACPS-1RU & JUP-GPIO-1RU).

JUP-CP-LCD16-DC-GP

Jupiter 16 soft labeled RGB LCD button control panel. Configurable as BPS, XY Status 
panel & Category entry for up to 20 input/output categories. Scroll wheel operations. With 
DC power supply & GPIO option. (JUP-DCPS & JUP-GPIO-1RU).

JUP-CP-LCD48 Series Control Panels

JUP-CP-LCD48-AC

Jupiter 48 soft labeled RGB LCD button control panel. Configurable as BPS, XY Status 
panel & Category entry for up to 20 input/output categories. Scroll wheel operations. With 
AC power supply. (JUP-ACPS-1RU).

JUP-CP-LCD48-DC

Jupiter 48 soft labeled RGB LCD button control panel. Configurable as BPS, XY Status 
panel & Category entry for up to 20 input/output categories. Scroll wheel operations. With 
DC power supply. (JUP-DCPS).

JUP-CP-LCD48-AC-GP

Jupiter 48 soft labeled RGB LCD button control panel. Configurable as BPS, XY Status 
panel & Category entry for up to 20 input/output categories. Scroll wheel operations. With 
AC power supply & GPIO option. (JUP-ACPS-1RU & JUP-GPIO-2RU).

JUP-CP-LCD48-DC-GP

Jupiter 48 soft labeled RGB LCD button control panel. Configurable as BPS, XY Status 
panel & Category entry for up to 20 input/output categories. Scroll wheel operations. With 
DC power supply & GPIO option. (JUP-DCPS & JUP-GPIO-2RU).

Summary of Contents for JUPITER -





























































































































































































































Reviews:

No comments

Related manuals for JUPITER -

Bartlett 700 Series Operation Manual preview
700 Series
Brand: Bartlett Pages: 30
DAV TECH DA 250 Installation And Maintenance Manual preview
DA 250
Brand: DAV TECH Pages: 10
2VV AirGENIO SUPERIOR Manual preview
AirGENIO SUPERIOR
Brand: 2VV Pages: 27
Eaton CF2000 Installation And Operation Manual preview
CF2000
Brand: Eaton Pages: 100
Farfisa TD6100 Manual preview
TD6100
Brand: Farfisa Pages: 20
Racal Instruments 1266 Manual preview
1266
Brand: Racal Instruments Pages: 64
Taie FY100 Communications Manual preview
FY100
Brand: Taie Pages: 28
National Instruments PXIe-8238 Getting Started Manual preview
PXIe-8238
Brand: National Instruments Pages: 6
National Instruments PXI-8231 Installation Manual preview
PXI-8231
Brand: National Instruments Pages: 6
YASKAWA U1000 iQpump Drive User Manual preview
U1000 iQpump Drive
Brand: YASKAWA Pages: 426
YASKAWA Motoman DX200 Safety Notes preview
Motoman DX200
Brand: YASKAWA Pages: 26
YASKAWA motoman NX100 Instructions Manual preview
motoman NX100
Brand: YASKAWA Pages: 210
YASKAWA Z1000 CIMR-ZU*A Series User Manual preview
Z1000 CIMR-ZU*A Series
Brand: YASKAWA Pages: 400
YASKAWA Z1000 CIMR-ZU*A Series Technical Manual preview
Z1000 CIMR-ZU*A Series
Brand: YASKAWA Pages: 466
B&G ZEUS S Detailed App Manual preview
ZEUS S
Brand: B&G Pages: 19
National Instruments PXI-8150B User Manual preview
PXI-8150B
Brand: National Instruments Pages: 78
Belden GRASS VALLEY MDX-3901 Manual To Installation And Operation preview
GRASS VALLEY MDX-3901
Brand: Belden Pages: 45
Festo CPX-AP-A-16DI-D-M12-5P Operating Instructions Manual preview
CPX-AP-A-16DI-D-M12-5P
Brand: Festo Pages: 16

Brands by name

Popular brands

Load more brands