56
JUPITER L-S and LCD Series Control Panel Instruction Manual
Section 3 — Software Installation & IP Addresses
b.
Select the “Set IP” button along the top of the NetConfig window.
You should see the “Change IP Addresses” menu.
c.
In the “Select Device Type” field, select “All Devices.”
d.
Select the panel requiring an address change.
e.
Select “Edit.”
f.
IP address: set to a unique value within the same network as the
Jupiter file server.
For example, if the Jupiter file server address is 192.168.253.1, then
the panel address should be changed to reside in the 192.168.253.x
network (such as “192.168.253.101”).
g.
Subnet Mask: set to 255.255.255.0 (Class C network).
h.
Gateway: not used in a simple network environment.
If the panel and the server are on separate networks, the gateway
connecting them must be specified. See
page 54
.
i.
Select “OK,” “Apply Changes,” and “Close.”
In the IP View, a green dot should indicate that the panel is fully
connected.
The panel itself should reboot.
j.
Proceed to
Setting Jupiter Values for L-S Panels
below.
Setting Jupiter Values for L-S Panels
During the following steps, you will need to know the IP address of the
AccuSwitch system that will be associated with the panel. Use the Jupiter
File Server JNS Control Center application to determine the CM-4000/CM-
4400 IP address (the Control Center application is described in both the
Jupiter CM-4000 Installation and Operating manual
and the
Jupiter CM-4400
Installation and Operating manual
).
1.
Using NetConfig, click on the name of the panel (as described in
Step 4
above).
You should see the Product Web Access page for the panel.
2.
Select “Panel Network.”
You should see the Panel Network Configuration page.
a.
The “Net-1 IP Settings” should already be correct (they were set
using the “Change IP Addresses” menu described above).
b.
Uncheck “Net-1: Set DHCP Mode” and “Net-2: Set DHCP Mode”
(unless IP addresses are being set automatically by a Dynamic Host
Configuration Protocol server).
Summary of Contents for JUPITER -
