GRASS VALLEY JUPITER -, Instruction Manual

Page: 61 / 220

JUPITER L-S and LCD Series Control Panel Instruction Manual 61
Control Panel Sets
Override Set
- (Does not apply to S25 and S50. Optional for all other L-S
panels.) Select a CP Override set name. A CP Override set can be used to
define a set of Sources and level combinations that can be quickly applied
to a panel controlled Destination. Up to 10 pages of overrides (80 overrides
total) may be defined. The order in which the overrides are listed on the CP
Override set table will be the order in which they appear on the panel.
Sequence Set
- Select a CP Sequence set name. A Sequence set is used to
execute a list of switches with a single command. (Does not apply to S25
and S50and is optional for all other L-S panels.)
Control Panel Sets
Switcher Sources and Destinations for the L-S panels are specified by cre-
ating a Jupiter CP Level Set, a CP Input Set, and a CP Output Set. These sets
are assigned to each panel using the MPK Devices table (
Figure 26 ).
CP Level Set
The CP Level Set used for L-S panels is specified as type CP3800.
With L-S panels, the CP Level Set establishes the order in which levels are
displayed on the panel and the display mnemonics used for the various
levels (“Video,” “Left,” etc.). The display mnemonics have a maximum
length of eight characters.
CP Input and CP Output Sets
The CP Input and Output Set is specified as type CPESXTND for all L-S and
LCD models. The number of category buttons varies from panel to panel,
as indicated in
Table 1 .
Table 1. Panel Category Buttons
L-S Panel Model
Number of Category
Buttons (default)
L32 None
L64 None
LD4 16
LD16 20
S25 None
S50 None
S100 None
SXY 16
LCD 98 (20 categories at a time)