This function defines the water level in the tub for the module being programmed.
Depending on the profiles that are programming the module, the following levels can be set:
Reduced;
Normal;
Abundant;
Defined by the user.
The last selection is reserved to the "professional operator" or higher levels.
The first three selections are related directly to the type of appliance set in the S9 service
menu; therefore, they do not require the insertion of a number of cm of water in the tub but
an intuitive selection between little, normal, or a lot of water.
Attention!
•
Program all the values as if the temperature were filled with the nomi
-
nal load. GUIDO
®
then proportionally reduces all the values according
to the real laundry load inside the drum, if the weighing function is ac-
tivated;
7.3.2 LEVEL
How water must be loaded in the tub.
You can choose between:
•
NO
•
Balanced
•
Customised value
If setting is left on NO, the appliance will not load water for this module.
By setting Balanced, the hot and cold water inlets will be activated automatically so to reach
the set-point temperature without (or almost without) activating the heating units.
Customised value. The expert laundry operator can manually activate/deactivate all the wa-
ter inlets according to specific requirements.
7.3.3 WATER LOAD
There are three options that allow you to activate the liquid detergent automatic dosing units:
•
Customised Level Loading;
•
Reached level loading:
•
Simultaneous soap/water loading.
The first option allows you to set how many cm of water in the tub are needed to activate the
dosing units. GUIDO
®
provides a level and the expert laundry operator can modify it.
The second option involves the activation of the dosing units only from when the first set-point
of the water level in the tub is reached.
The last option allows you to activate the dosing units together with the water load solenoid
valves.
However, all the chemical products loaded with the dosing units or dispenser first go through
the mixer before entering the tub; therefore, they always arrive already diluted.
7.3.4 SOAP LOADING
