Module duration
Simply, how long the module lasts. If heating is active, this time starts
being counted from when the set temperature is reached. If heating is
not active, this time starts from when the water reaches the set level in
the tub.
Drain mode
The appliances can be equipped with one or two drains, with the possibil-
ity to recover the drained water in an external tank. Here you can make
this selection. You can also make the appliance not drain.
Spin speed
Definition of the spin modes: speed, duration, deceleration, number of
starts in case of imbalance, etc.
LOOP end
Set the LOOP end when a certain number of modules should be repeat-
ed; for example, to repeat pre-wash and wash twice in a row.
7.3 STEP DETAILS
Definition of the programming mode of the module steps.
Some modules involve simple selections and have already been extensively described in the previous para-
graphs. Moreover, always read the indications displayed on GUIDO
®
to program the various functions.
When this function is activated, GUIDO
®
determines how many kg of laundry are loaded in
the drum, by running two brief spins without having loaded water.
The weighing function does not damage the garments, as the two brief spins do not gener-
ate mechanical action. This means that the garments do not rub, thus preventing potential
pilling.
Moreover, the duration of the two brief spins does not fold or crush the fabric.
According to the weight detected, GUIDO
®
determines the following functions automatically
and autonomously:
Water level in the tub;
Mechanical action during washing, i.e. drum speed;
Amount of detergents to be dosed with the automatic dosing units.
Attention!
•
In the subsequent steps, program all the values as if all the appliances
were filled with the nominal load. GUIDO
®
then proportionally reduces
all the values according to the real laundry load inside the drum;
•
To start a washing programme with wet laundry, we recommend disa-
bling the weighing function;
•
In the event this function is not disabled, the appliance will read a high-
er load than the real one; therefore, it will use the programmed values
as if the appliance were loaded with 100% of the nominal load.
7.3.1 WEIGHING
