6.8 S8 SOAP PUMPS
This menu allows you to set the data relative to the liquid detergent dosing system used to supply the ma-
chine.
Flow rate value and name can be set for each of the 13 potential dosing pumps managed by GUIDO
®
.
Setting the flow rate value of the pump allows you to also select, during the washing programme setting,
pump activation not only simply through time but also via the amount of product desired. GUIDO
®
then cal-
culates and keeps the pump activated until the desired dosage is reached.
6.9 S9 MACHINE TYPE
This menu allows you to set which machine GUIDO
®
must manage.
There are two setting fields:
P1 = to set the low speed spin models
P2 = to set the high speed spin models
The values from which you should select the model indicate the commercial name of the appliances, which
is also shown in the identification plate on the rear of each appliance.
Attention!
•
In the event you select a model of a "family", make sure that the mes-
sage NOT CONFIGURED is always selected in the other field.
6.10 S10 CHANGE PASSWORD
This menu allows you to change the passwords set by factory default. Obviously, you must know the default
factory password to be able to change it.
6.11 S11 CONSUMPTION
This menu allows you to read the appliance consumption and use data saved by GUIDO
®
during operation.
It is a consultation menu. In any case, counters can be reset to allow them to restart counting from a deter-
mined moment to meet specific requirements.
6.12 S12 ALARMS LOG
This menu allows you to read the anomaly data of the equipment saved by GUIDO
®
during operation.
It is a consultation menu.
6.13 S13 PIN
Menu managed by the manufacturer of the appliances.
