6. SIMPLIFIED MANAGEMENT OF THE SERVICE MENU
6.1 ACCESS TO THE SERVICE MENU
6.2 PAGES OF THE SERVICE MENU
To access the SERVICE menu with the appliance on but in standby (porthole open), touch the OK symbol for
at least 5 seconds.
At this point, the display changes the type of information normally displayed and shows the three pages of
the SERVICE menu, which consist of 17 macro areas that go from S1 to S18.
Every area has its specific functions and allows you to set or select functions belonging to the same field,
e.g. type of water loading, self-service operation management, maintenance, etc.
All three pages that make the SERVICE menu are listed below.
The SERVICE menu is an area of GUIDO® where all the functional parameters of the appliances are set,
including operating limits, change of language, profile, appliance type, etc.
This user manual describes the main aspects of this menu.
Attention!
•
To browse the SERVICE menu, follow the same rules as for selecting the
washing programmes, both in terms of using the colours to identify the
selected elements and of changing any numerical parameters.
•
To exit the SERVICE menu without saving the changes, repeatedly
touch the red STOP symbol or the left arrow until you return to the main
screen that allows you to select the washing programme.
S1
Master 1: access reserved to the manufacturer
of the appliances
S10
Change password.
S2
Master 2: access reserved to the maintenance
technician
S11
Consumptions.
S3
Language: selection of the language with
which GUIDO
®
interacts with the users.
S12
Alarms log.
S4
Type of use: profile change. Access via pass
-
word.
S13
PIN
S5
Preferred cycle. Determines the washing pro-
gramme with which GUIDO
®
must start up
S14
Inverter management
S6
Coin. Password protected menu.
S15
Maintenance
S7
Water loading. To be set in the event of poor
pressure of the water network.
S16
Connections
S8
Soap pumps. Setting the capacities and name
of detergents.
S17
Data pre-setting. Wiping the GUIDO
®
mem-
ory except for the washing programmes.
S9
Machine type. Used only to initialise the new
GUIDO
®
sheets
S18
Date/Time. Clock setting.
