The bottom left (7) indicates the profile with which the GUIDO
®
control has been set, i.e, how GUIDO
®
in-
teracts with the operator.
5.3 OPERATION OF THE BUTTONS
The GUIDO
®
control panel is made of scratch-resistant tempered glass. Simply place your finger on the
sensitive areas to interact with the buttons and appliance operation.
GREEN "START" BUTTON
It starts the appliance even after a pause has been enabled manually. While
the washing programme is running, it allows you to "fast forward", skipping
over the phases one by one.
Touch the button for at least two seconds to activate fast forward.
RED "STOP" BUTTON
It stops the washing programme in progress if you touch the button for more
than 5 seconds. A slight touch (even instantaneous) sets the appliance in
standby. Touch START to disable the standby mode.
In programming mode and/or when displaying the washing param-
eters, it has also the DELETE function. This allows you to exit the
selected menu without applying any changes.
By pressing it when the appliance is not running, it allows you to save as
or delete a washing programme (
definitive elimination
). See subsequent
chapters for further details.
RIGHT AND LEFT ARROWS
They allow you to change the page displayed in any configuration of the ap
-
pliance and inside any menu.
During the programming mode and/or when displaying the washing param-
eters, the left arrow also has the DELETE function, which allows you to
exit the selected menu without applying any changes. At the end of the exit
procedure, GUIDO
®
asks if you want to save the modifications, eliminate the
washing programme or if you want to save it with a name.
Attention, deleting is permanent.
Attention!
•
Do not touch the display to activate functions or change the operating
parameters;
•
Settings and regulations are made on the highlighted area described
below.
