Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
2.4
Fault diagnosis
Page 7 of 16
TABLE OF CONTENTS
Step
no.
Inspect/operate
Result/specified status
Troubleshooting
2.5
Move the seat to the middle position and apply
load to the seat.
The level control moves the seat to
the original position (up).
The level control does not move the
seat up to the original position.
Proceed with inspection
step no. 2.6.
Replace the level control
(Chapter 3.38).
2.6
Unload the seat.
The level control moves the seat
down to the original position.
The level control does not move the
seat down to the original position.
End of inspection.
Replace the level control
(Chapter 3.38).
