Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.28 Belt buckle with belt buckle cable (delivery option) –
removal and installation
Page 3 of 3
REMOVAL / INSTALLATION
TABLE OF CONTENTS
6 Pull out the clip (8) at the seat
frame (10).
7 Remove the belt buckle cable (2) from
the clip (8).
8 Unscrew the hexagon bolt (3) and
remove the belt buckle (1) with the
belt buckle cable (2) and the
spacer (4).
Installation notes:
•
Hexagon bolt (3), 45 Nm.
•
The nose (arrow) on the bottom side
of the spacer (4) must snap into the
drill hole of the seat frame (10).
•
The belt buckle cable (2) must run in
front of the Bowden pull wire for
backrest adjustment (6).
9 Re-install the components in the
reverse order of their removal.
1
4
2
3
10
2212
7
8
9
10
2
10
3
5
4
6
1
9
8
7
2
