Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.39.1 Supporting structure and pin contact strip –
removal and installation (Actros)
Page 3 of 3
REMOVAL / INSTALLATION
TABLE OF CONTENTS
4 Lift off the seat from the supporting
structure (1) and remove the
supporting structure (1).
5 Removal of the pin contact strip (2):
5.1 Disconnect the electrical connection
between the pin contact strip (2) and
the plug of the cable for vehicle
connection (5).
5.2 Pull off the air hose for air intake
(10) and air exhaust (9) at the
connection for air intake (6) and air
exhaust (7).
5.3
Seat with operator console and
armrest for electro-pneumatic
gearshift (EPS):
Disconnect the electrical connection
between the pin contact strip (2) and
the plug of the EPS cable (8).
5.4 Remove the pin contact strip (2).
6 Re-install the components in the
reverse order of their removal.
2230
2
4
3
3
1
4
4
4
4
4
4
4
1
2
5
6
7
8
9
10
4
4