Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.8
Bowden pull wire for seat height adjustment –
inspection and adjustment
Page 3 of 6
INSPECTION ADJUSTMENT
TABLE OF CONTENTS
Adjustment
Notes:
•
No different adjustable dimensions of
the Bowden pull wires for seat height
adjustment (1) with regard to seat
models with left-hand or right-hand drive.
•
The new Bowden pull wire for seat
height adjustment (1) must be
preadjusted outside the seat.
1 With the Bowden pull wire for seat
height adjustment (1) being
installed:
1.1 Remove the left covering in position
for repair (Chapter 3.4).
1.2 Remove the bellows at the rear left
of the handle rail (see Chapter 3.6).
1.3 Detach the Bowden pull wire for seat
height adjustment (1) at both ends
(see Chapter 3.9).
8
6
9
8 9
1
7
5
A
1
1
2
4
3
5
7
6
2178
