Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.15 Bowden pull wire for locking mechanism of the fore/aft isolator –
removal and installation (delivery option)
Page 4 of 4
REMOVAL / INSTALLATION
TABLE OF CONTENTS
9 Loosen the lock washer (2) at the
Bowden pull wire (1).
10 Detach the Bowden pull wire (1) at
the upper suspension part (3).
11 Pull the Bowden pull wire (1) out of
the drill holes (arrows) in the seat
frame (8).
12 Remove the Bowden pull wire (1)
from the holder (4).
13 Detach the Bowden pull wire (1) at
the eccentric (5).
Installation note:
Adjust the new Bowden pull wire (1)
to the length of the old one (1)
(excess length of the wire).
14 Re-install the components in the
reverse order of their removal.
1
8
10
11
9
5
4
3
1
8
2
1
6
7
8
1
3
1
8
5
4
2203
