Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.50 Cable harness heater switch – removal and installation
(seat with climate control system)
Page 4 of 4
REMOVAL / INSTALLATION
TABLE OF CONTENTS
7 Mark the points where the electrical
connections (K, L) are bundled with a
cable tie (8) and remove the cable
tie (8).
Installation note:
The cable tie (8) must be guided
trough the cable tie (6) fastened at the
seat support (5).
8 Disconnect the electrical connection
(K) between cable harness of the
heater switch (1) and the cable
harness for the backrest (7).
9 Remove the cable harness for the
heater switch (1).
Installation note:
Install the cable harness of the heater
switch (1) according to the marking.
10 Re-install the components in the
reverse order of their removal.
2547
3
3
1
2
4
1
2
2
3
K
N
K
1
L
9
7
3
2
1
1
7
8
6
12
10
5
9
11
4
2
3
N
